Water Treatment

Aus-Asia Water Engineering Group work with a group of specialist companies in Perth Western Australia who have for over 30 years worked in the design, manufacture, installation and project management of water & sewage treatment systems through out Australia and many locations over seas including the Asia Region.
Working with these companies, we will investigate the best and most responsible solution for our clients needs for each project.
This allows us to select the most appropriate engineers and suppliers for the project at hand.

It is our intention in call cases to work with local companies and labour to procure any locally available materials and expertise before involving external suppliers. If it is deemed that better, more efficient or cost effective technologies are available externally, this information will be sourced, and through discussion and careful consideration the best option for the application at hand will be applied to the project

There are many options with relation to water treatment plants. The design will in all cases be based on the supply water quality, the required product quality and the water quantity/hour required.

Water Treatment Systems
Aus-Asia Water Engineering will work with our clients to develop and design a water treatment system to best meet the needs of the project. The design stage of the project will entail the gathering of detailed information with relation to the requirements of the project and then an analysis of the supply water to be treated. We can provide budget designs and costing's for presentation to our clients.

These water treatment systems can be supplied to any capacity. We are able to design and supply fully installed systems that can be fitted in existing or new purpose built buildings or in containerized form with relocation in mind.

In all projects, it is our intention to utilize local knowledge and equipment for these projects, to assist in developing local business and to provide employment for local workers and contractors.

It is our goal to import minimal equipment for projects and to provide new technology for the new systems.

Sewage Treatment Plants
Technology has increased over recent years in the area of sewage treatment. With the substantial shortages of water in the world today, treatment of sewage to a re-usable level has become a must rather than a preference.

The technology we bring to this market will provide a level of treatment that will allow the re-use of sewage water for irrigation projects of discharge into waterways. The discharge water for either irrigation or for discharge into water ways will be of a quality that it will enhance the environment into which it is placed. BOD and pathogen levels are carefully monitored and regulated in order that no contamination can occur or spread of disease.

Containerized and Component Systems
We also specialize in containerized systems. In remote regions of the country, availability to equipment and trades people work on and construct these systems can be a factor and as such, a modular system can be designed and installed. The entire system will consist of multiples of 40ft containers that are stood on prepared blocks. The components of the system are then connected together and the system is then ready for start up. Water tanks are installed to assist in the regulation of the inflow and final treatment and polishing of the outflow from the system. These systems can also be set up to run on Solar power if required. This option would depend on the availability of regular and continuous power supply as loss of power would shut the system down and this can not be an option for this type of system.

These systems can in many cases be cheaper and faster to install given minimal preparation or site works.

Local Labour and Local Manufacture
It would be our intensions to work to prepare these containerized components locally and then transport to site. Technology would be imported for the construction and set up of these systems and local labour would be employed for their construction and installation.

It is our intention in call cases to work with local companies and labour to procure any locally available materials before involving external materials and equipment sources. If it is deemed that better, more efficient or cost effective materials are available externally, this equipment be sourced, and through discussion and careful consideration the best option for the application at hand will be applied to the project.

Drinking Water Treatment Plants

Water Treatment Plants for water supplies for human consumption are critical in their design and construction. Initial design is of utmost importance to ensure that in the design stage, all areas and possibilities are covered including the possibility of deterioration of the supply water stream to the system.

When all areas are covered, the system will be designed with tolerances in place to allow for any potential deterioration in the supply water. All system within the treatment plant are duplicated to allow for a partial shut down in the event of failure of a component in the system. This duplication design makes allowance for the inevitable and ensures a continued water supply to the end user, even if at a reduced rate while repairs to the system are undertaken.

There are many options with relation to water treatment plants. The design will in all cases be based on the supply water quality and the required product quality.

Standards
In all cases, the design will be prepared to provide a product water that will meet WHO (World Health Organisation) standards for potable or drinking water.

These standards also require constant and ongoing monitoring and maintenance of the system. This is an area that will require the highest level of design and training of the final owners and operators of the water treatment plant.

Remote Monitoring System and Service
We are able to fit remote monitoring equipment and if required, remote control to all our water treatment plants. Critical information with regard to supply water, system pressures, filter status, product water quality and failure of any component is gathered and stored in data loggers on the system. This information is downloaded on a regular basis in order that trends can be established and maintenance schedules can be established and put in place.

If it is found that there are no current standard procedures for the treatment of a particular material, at the clients request and direction, trials will be undertaken to prepare and prove up a technique and a system to cater for the problem. It is then recommended that a pilot plant be prepared to treat some of the actual material at the site in order that tests can be conducted on the product water from the system and formal records prepared for submission to the client and then, if required to the relevant authorities. The submission of any information to local relevant authorities would be by the express direction of the client and not by our company, ensuring total confidentiality throughout the entire project

As these projects are sensitive by there very nature, total confidentiality is assured to the client and no information is divulged to any person, company or regulatory body relevant to the project without the express permission or direction of the client.

In the case of changes to any part of the system or water quality, the system will raise an alarm that will then be phoned through to the operation base. A maintenance technician would then be sent to the site to attend to the problem. He would have the appropriate information prior to attending in order that speedy repairs to the system can be effected and the supply restored.

Consistency of Quality and Supply are the goals for these water treatment plants

Chemical and Waste Water Treatment Plants

Chemical Waste Water Treatment is both critical and sensitive by nature.

Much of the contamination to local waterways is through discharge of chemical waste water and untreated sewage.

Every waste water treatment plant is designed to the individual needs of the project.

Our group of companies have substantial experience in many areas of chemical waste water treatment. We are able to provide designs for biological or chemical treatment systems dependant on the application.

There are a range of options for the treatment of many waste water products and a limited range of options for others. Hence the need to obtain detailed and specific information for each project.

Once detailed analysis of the product to be treated is made available, details are sent to our chemical engineers for assessment. If it is found that proven systems are in place for the particular product, details of quantities on a litres/day basis including any peak periods etc are gathered to assist in the design of the system.

If it is found that there are no current standard procedures for the treatment of a particular material, at the clients request and direction, trials will be undertaken to prepare and prove up a technique and a system to cater for the problem. It is then recommended that a pilot plant be prepared to treat some of the actual material at the site in order that tests can be conducted on the product water from the system and formal records prepared for submission to the client and then, if required to the relevant authorities. The submission of any information to local relevant authorities would be by the express direction of the client and not by our company, ensuring total confidentiality throughout the entire project.

Confidentiality Assurance
As these projects are sensitive by there very nature, total confidentiality is assured to the client and no information is divulged to any person, company or regulatory body relevant to the project without the express permission or direction of the client.

The intension is to make a positive difference to our environment. Lets make a better world for our children.